• 0 Posts
  • 12 Comments
Joined 2 years ago
Cake day: June 16th, 2023
  • 9tr6gyp3@lemmy.worldtoPC Gaming@lemmy.ca•New UEFI vulnerability bypasses Secure Boot — bootkits stay undetected even after OS re-installEnglish
    1·
    9 minutes ago

    Ok, I’ll say that to your xperia, s9+, and s7

    Per manufacturer’s website for xperia:

    This device is water resistant and protected against dust. All ports and attached covers should be firmly closed. Do not put the device completely underwater or expose it to seawater, salt water, chlorinated water or liquids such as drinks. Abuse and improper use of device will invalidate the limited warranty. The device has been tested under Ingress Protection rating IP65/68. Sony devices that are tested for their water-resistant abilities are placed gently inside a container filled with tap water and lowered to a depth of 1.5 meters. After 30 minutes in the container, the device is gently taken out and its functions and features are tested. Note this model has a capless USB port to connect and charge. The USB port needs to be completely dry before charging.

    Per manufacturer’s website for s9+:

    Water-resistant and dustproof based on IP67 Rating, which tests submersion up to 1 meter for up to 30 minutes. Not shockproof.

    Per manufacturer’s website for s7:

    Water-resistant and dustproof based on IP67 Rating, which tests submersion up to 1 meter for up to 30 minutes. Not shockproof.

  • 9tr6gyp3@lemmy.worldtoPC Gaming@lemmy.ca•New UEFI vulnerability bypasses Secure Boot — bootkits stay undetected even after OS re-installEnglish
    1·
    23 minutes ago

    Its IP65 if the headphone jack isnt covered. Per the manufacturer’s website for this phone model:

    The device has been tested for water resistance using IEC 60529 standard and has achieved an IP65/68 rating. Water and dust resistance can deteriorate over time in normal usage, or if the device is damaged, repaired or taken apart. The device should never be completely submerged underwater, and should not be allowed to come into contact with seawater, brine, chlorinated water or drinks. Failure to observe correct precautions will invalidate the device warranty and the function of water and dust resistance. Water resistance is tested by submerging the device to a depth of 1.5 meters in tap water for 30 minutes. After the test the device is removed and fully dried, then checked for normal operation. Please note that the device has a USB-C charging port, and this USB-C port must be completely dry before any attempt is made at charging. For related warranty information, please refer to the product warranty card.