In 2006 my wife and I moved into a new house and bought a Dacor RSD30S stove.
Dacor made parts for the thing for TWO YEARS and that’s it. I owned it for 12 years and it went through three igniters and the door handle broke. The first igniter broke within 18 months and I was able to replace it with a new one. The second one went out at around 5 years and the part was already discontinued. Fortunately, the parts guy I was ordering from was very familiar with Dacor and said that the igniter from the new model would work, the bracket would just need to be drilled to mount it. It took me all of 5 minutes. The third one went out and I was screwed. So I spent about 2 years manually igniting my “modern” duel fuel range. Even when it did work, Dacor used one igniter coil for all four igniters. If they were not all perfectly clean the current would only go to one with the least impedance and the rest wouldn’t work.
I was never able to fix the broken handle.
Dacor… Never again.
Contrast that with the stove I replaced the Dacor with, a Wolf DF304. Granted, we’re talking about a very high end range vs a middle of the road POS. However, Wolf has not changed the design of the DF304 in 25 years. I actually bought my Wolf 2nd hand, hence why I could afford it. It was 8 years old when I bought it. Wolf not only still has all the parts for it in stock, the stove is still in production. It currently is 14 years old and works like new, compared to the Dacor being 12 years old and completely clapped out. Also Wolf uses independent coils for each igniter, so the current doesn’t flow to the igniter with the least impedance like the Dacor.
I know this sounds like a case of “you get what you paid for”, but that Dacor new was $2500, so not exactly cheap.
And don’t even get me started on General Electric appliances…
Dacor Stove
In 2006 my wife and I moved into a new house and bought a Dacor RSD30S stove.
Dacor made parts for the thing for TWO YEARS and that’s it. I owned it for 12 years and it went through three igniters and the door handle broke. The first igniter broke within 18 months and I was able to replace it with a new one. The second one went out at around 5 years and the part was already discontinued. Fortunately, the parts guy I was ordering from was very familiar with Dacor and said that the igniter from the new model would work, the bracket would just need to be drilled to mount it. It took me all of 5 minutes. The third one went out and I was screwed. So I spent about 2 years manually igniting my “modern” duel fuel range. Even when it did work, Dacor used one igniter coil for all four igniters. If they were not all perfectly clean the current would only go to one with the least impedance and the rest wouldn’t work.
I was never able to fix the broken handle.
Dacor… Never again.
Contrast that with the stove I replaced the Dacor with, a Wolf DF304. Granted, we’re talking about a very high end range vs a middle of the road POS. However, Wolf has not changed the design of the DF304 in 25 years. I actually bought my Wolf 2nd hand, hence why I could afford it. It was 8 years old when I bought it. Wolf not only still has all the parts for it in stock, the stove is still in production. It currently is 14 years old and works like new, compared to the Dacor being 12 years old and completely clapped out. Also Wolf uses independent coils for each igniter, so the current doesn’t flow to the igniter with the least impedance like the Dacor.
I know this sounds like a case of “you get what you paid for”, but that Dacor new was $2500, so not exactly cheap.
And don’t even get me started on General Electric appliances…